Speed Grip MANUAL DOUBLE

manual clamping system for Promecam style tools

General informations

The SPEED GRIP MANUAL DOUBLE system is a manual clamping for upper tools with an ergonomic lever. The introduction and extraction of the tool takes place from the front and is compatible with standard European style tools. No limit of length, shape and quantity of the tools inserted.
The housing is automatic and it is possible to mount the tool inverted from the front of the press.

CHECK THE VIDEO OF THE
SPEED GRIP MANUAL DOUBLE

Technical features

UPPER TOOLS

Manual clamping for upper tools by means of a comfortable ergonomic lever

FRONTAL LOADING

Simultaneous tool lifting, housing, and clamping of all the tools present on both front and rear side of the press brake, by manual lever (one per unit). Once in place, the lever does not bulge out No length, shape, or quantity limit of tools. Automatic tool lifting and housing

flexibility

Simultaneous tool lifting, housing, and clamping of all the tools present on both front and rear side of the press brake, by manual lever (one per unit). Once in place, the lever does not bulge out.

Release: opening the lever frees all the tools present. The system prevents it from being released with absolute safety.
Extraction: it takes place only by acting on each single piece with lifting at the stop, small rotation and extraction downwards. The operation does not require additional efforts in addition to the weight of the tool.

TECNICAL FEATURES

Unit height= 120mm.
bending axis = 7mm.

Dual orientation

Possibility of mounting the tool upside down, from the front of the press: each single piece of tool can be mounted with a front or rear orientation (180 ° rotation) according to the need for bending.

Clamping Speed Grip MANUAL DOUBLE

Set-up time

on 3mt press brake (15 modules)

Operation	Traditional model MANUAL WITH SCREWS	Model TEDA SPEED GRIP MANUAL (13131-M)
Screw loosening	30 screws = 5″ total = 150″	15 modules by lever = 2″ total = 30″
Tool extraction	Lateral = 25″ total = 100″	Frontal = 8″ total = 32″
Tool loading	Lateral = 25″ total = 100″	Lateral = 6″ total = 24″
Pre-screwing 30 screws	4″ total = 120″	–
Light pressing to house tools	10″ total = 10″	–
Screw tightening 30 screws	3″ total = 90″	–
clamping 15 modules by ergonomic lever	–	4″ total = 30″
Total time	570″ = 9′,30″	116″ = 1′,56″